Aerators and Spray Heads
Free Delivery over £100.00
Order by 3pm for same working day dispatch by Royal Mail 24
Order by 3pm for same working day dispatch by Royal Mail 24

Compatible Spare Parts for the Franke Triflow Tradition

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Triflow-TraditionSV-ABAnticlockwise (to open) blue1/2" x 21 x 53mm£11.90 Tomorrow
Triflow-TraditionSV-CRClockwise (to open) red1/2" x 21 x 53mm£11.90 Tomorrow
Triflow-TraditionSV-PPair (1 x red, 1 x blue)1/2" x 21 x 53mm£23.80 Tomorrow
Triflow-TraditionSV-3Triflow pack(1 x red, 2 x blue)1/2" x 21 x 53mm£35.70 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK94-SSingleSpout O'Ring Repair Kit£5.00 Tomorrow
SL05-SSingleLubricant£3.50 Tomorrow
ST17-SSingle17mm spanner£6.50 Tomorrow
STBOX-SSingleCartridge Removal Box£9.50 Tomorrow
ST0TTK-SSingleMonobloc Tap Tightening Set£10.50 Tomorrow


FRANKE TRIFLOW TRADITION TAP SPARES
Compatible replacement cartridges for the Franke Triflow Tradition Kitchen Mixer tap.


If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

Known by spare parts FR9245 Hot and FR9246 Cold and Filter Valve.
Hot 9.13145 (FR9145) and Cold 9.13146 (FR9146)

Hot, cold and filter valves replacements available with 21 adaptor. Original cartridge has a 21 spline nylon handle adaptor.

You will need a clockwise for the hot side and anticlockwise for the cold and filter water.
If you would like to replace all 3 please select our Triflow pack option.

Frequently asked questions about your Franke Tradition tap.

How do I remove the Tradition tap lever / handle?

First you will need to turn off the water supply to the tap.
Carefully unscrew and remove the hexagon handle screw, using a 10mm spanner or a suitable adjustable one.
Pull off the complete lever handle. Unscrew the shroud anticlockwise.
Remove the nylon adaptor. It will either remain on the end of the old valve or stay inside the handle.
A new nylon adaptor is supplied with replacement cartridges.

How to replace your cartridge?
Use 17mm spanner to undo cartridge anticlockwise.
Some water will seep out, keep a cloth handy.
You will need to remove the Nylon clip on the Trend 1 Lever model.

You can find the tap lever removal diagram / instructions below.
How do I remove the tap spout and replace the o-rings?
Use a Allen key to undo grub screw holding spout in place. Pull spout up and out of tap body.

Any further questions contact our experienced technical team.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.