Compatible Spare Parts for the Perrin And Rowe Metis

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
MetisSV-ABAnticlockwise (to open) blue1/2" x 21 x 53mm£10.75 Tomorrow
MetisSV-CRClockwise (to open) red1/2" x 21 x 53mm£10.75 Tomorrow
MetisSV-PPair (1 x red, 1 x blue)1/2" x 21 x 53mm£21.50 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
TA54K-PH59CPair with chrome Lever1/2" Cartridge x 28 x 54mm£50.00 Tomorrow
TA54K-PH59CBPair with Brushed Finish Lever1/2" Cartridge x 28 x 54mm£50.00 Tomorrow
SR63C-SSingleAerator chrome£6.60 Tomorrow
SR63CB-SSingleAerator brushed chrome£6.99 Tomorrow
SK94-SSingleSpout O'Ring Repair Kit£5.00 Tomorrow
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tomorrow
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tomorrow


PERRIN & ROWE METIS TAP SPARES
Replacement tap cartridges to suit the Perrin-And-Rowe Metis Lever kitchen tap 4480 and 4485 models.


For guidance / instructions of how to replace a tap valve step by step please click here

If your Metis tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

Original spare part code known by 9.13145 and 9.13146.
Hot and cold available.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by FR9400 / 9.06401.

If you require a new antisplasher/ aerator this is our part SR63C/CB. Available in Chrome or Brushed Chrome only.

How do I remove the lever handle and replace the cartridge?
Step 1. Turn off the water supply to the tap.
Step 2. Carefully unscrew the vertical lever and unscrew the grub screw.
Step 3. Pull the lever assembly away from tap body.
Step 4. Unscrew the shroud anticlockwise and pull up away from tap body.
Step 5. Use a 17mm or suitable adjustment spanner to remove the cartridge.



Watch our How to video for guidance on general removing tap handles and replacing tap cartridges.


Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.