PERRIN & ROWE METIS FILTRATION POST 2011 TAP SPARES
Replacement tap cartridges to suit the Perrin-And-Rowe Metis Post 2011 with filtration Lever kitchen tap 1480 and 1585.

Please note for the Pre 2011 Version we can only supply the hot and the cold (Metis-with-filtrationSV-P).
We cannot supply the front filter cartridge as the pre 2011 models use a smaller thread size which we cant supply.

Watch our How to video for step by step guide to replacing the tap cartridges. They are easy to change yourself with just a 17mm or adjustable spanner.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

Hot, cold and filter valves replacements available with 21 adaptor.
You will need a clockwise for the hot side and anticlockwise for the cold and filter water.
If you would like to replace all 3 please select our Triflow pack option.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by FR9400 / 9.06401.

If you require a new antisplasher /aerator this is our part SR01TF. Available in Chrome or Brushed Chrome only.

If you need a new set of lever handles we have a compatible lever available however the cartridge the lever fits is a different size so we sell this as a complete reviver kit (3 x new Cartridges + 3 New levers)

How do I remove the lever handle and replace the cartridge?
Step 1. Turn off the water supply to the tap.
Step 2. Carefully unscrew the vertical lever and unscrew the grub screw.
Step 3. Pull the lever assembly away from tap body.
Step 4. Unscrew the shroud anticlockwise and pull up away from tap body.
Step 5. Use a 17mm or suitable adjustment spanner to remove the cartridge.



Watch our How to video for guidance on general removing tap handles and replacing tap cartridges.