Perrin-And-Rowe Phoenician-with-filtration Spare Parts Phoenician-with-filtrationSV 7FE27423 1

FREE DELIVERY
OVER £100.00

SAME DAY DISPATCH
MONDAY-FRIDAY BEFORE 3PM

NEXT DAY DELIVERY
AVAILABLE

Compatible Spare Parts for the Perrin And Rowe Phoenician with filtration

Please select from the available product options shown below

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
Phoenician-with-filtrationSV-AB	Anticlockwise (to open) blue	1/2" x 21 x 53mm	£11.90		Monday
Phoenician-with-filtrationSV-CR	Clockwise (to open) red	1/2" x 21 x 53mm	£11.90		Monday
Phoenician-with-filtrationSV-P	Pair (1 x red, 1 x blue)	1/2" x 21 x 53mm	£23.80		Monday
Phoenician-with-filtrationSV-3	Triflow pack(1 x red, 2 x blue)	1/2" x 21 x 53mm	£35.70		Monday

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
SA02-III	Three singles	9mm adaptor x 21 teeth	£6.75		Monday
SK94-S	Single	Spout O'Ring Repair Kit	£5.00		Monday
SL05-S	Single	Lubricant	£3.50		Monday
ST17-S	Single	17mm spanner	£6.50		Monday
STBOX-S	Single	Cartridge Removal Box	£9.99		Monday
ST0TTK-S	Single	Monobloc Tap Tightening Set	£10.50		Monday

PERRIN & ROWE PHOENICIAN TAP SPARES
Replacement tap cartridges to suit the Perrin & Rowe Phoenician with filtration lever tap codes 1460.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

Original spare part code known by 9.13145 and 9.13146.
Hot, cold and filter valves replacements available with 21 adaptor.
You will need a clockwise for the hot side and anticlockwise for the cold and filter water.
If you would like to replace all 3 please select our Triflow pack option.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by FR9400 / 9.06401.

How do I remove the lever handle and replace the cartridge?
Step 1. turn off the water supply to the tap.
Step 2. Carefully unscrew and remove the hexagon screw that secures the handle, using a 10mm or adjustable spanner.
Step 3. Pull the lever assembly away from tap body.
Step 4. Unscrew the shroud anticlockwise and pull up away from tap body.
Step 5. Use a 17mm or suitable adjustment spanner to remove the cartridge.

How do I remove the tap spout and replace the o-rings?
Use a Allen key to undo grub screw holding spout in place. Pull spout up and out of tap body.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.