SCREWFIX ESSENTIALS TREBBIA DUAL LEVER TAP SPARES 9385T

Tap Magician compatible spares / parts to repair the Screwfix Trebbia Kitchen mixer tap.
Compatible with 9385T.
Watch our video below for guidance / how to remove your handles and change your quarter turn ceramic cartridge.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

Cartridge has 20 teeth on spline.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

Please note your original may have a white plastic spline adaptor.
This is available to purchase separately should you need to replace this.

If your tap is leaking from the neck (where the spout joins the tap body) then the seal inside the spout needs replacing.
When you replace the new rubber seal they need greasing with a silicone grease.

If you require a new antisplasher /aerator this is our part SR22X-S (Chrome).

Chrome tap base ring / plinth available SF048.

How To remove the Screwfix Trebbia tap handle:
Step 1. Isolate the water supply
Step 2. Remove the grub screw on the underside of the handle with allen key
Step 3. Pull off the handle
Step 4. Use an adjustable spanner to undo the cartridge anticlockwise Step 5.Screw in the new cartridge clockwise
Step 6. Tighten the cartridge enough to seal, but avoid over-tightening

How to remove the Screwfix Trebbia spout and replace the o rings / seals.
1. Use 2.5mm allen key to undo spout retaining screw
2. Pull spout up and away from tap body
3. Remove old o rings
4. Fit new o rings
5. Apply silicone grease (SL05) to the new o rings
6. Push spout back in to tap body

We now have a compatible lever handle set available. Please note these are a fraction wider than the original handles.

For guidance / instructions of how to replace a tap valve step by step please click here