Bristan Design-Utility-X Spare Parts Design-Utility-XQA 848F132303 1

Compatible Spare Parts for the Bristan Design Utility X

Please select from the available product options shown below

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
DesignXQA-AB	Anticlockwise (to open) blue	1/2" x 20 x 52mm	£8.49		Monday
DesignXQA-CR	Clockwise (to open) red	1/2" x 20 x 52mm	£8.49		Monday
DesignXQA-P	Pair (1 x red, 1 x blue)	1/2" x 20 x 52mm	£16.98		Monday

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
SR22X-S	Single	Aerator chrome F22x1 12 L/Min	£6.99		Monday
ST17-S	Single	17mm spanner	£6.50		Monday
STBOX-S	Single	Cartridge Removal Box Spanner 14 / 17mm	£9.50		Monday
ST0TTK-S	Single	Monobloc Tap Tightening Spanner Set	£10.50		Monday

BRISTAN DESIGN UTILITY X TAP SPARES.
Replacement spares for Bristan Design Utility X tap models Deck DUX DSM C and high neck pillar taps DUX HNK C

For guidance instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic cartridges.
Original spare part codes known by Bristan Spare part code VS02-C20 (short stem) / BS5412 XZ 20.
Cartridges have 20 teeth on the spline. Hot and Cold available.

Replacement flow straightener aerator available in chrome (SR22X-S) for the Deck DUX DSM C model.

How do I remove the handle/head on the Bristan Design Utility Lever Deck mixer tap?
Remove screw cover/ tap indices from the top of the handle. Use crosshead screwdriver to remove screw.
Pull handle / head off away and unscrew the shroud anticlockwise to remove the cartridge.

See tap diagram below.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.