Compatible Spare Parts for the Bristan Design X Pillar

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
DesignXPQA-ABAnticlockwise (to open) blue1/2" x 20 x 52mm £8.49 Today
DesignXPQA-CRClockwise (to open) red1/2" x 20 x 52mm £8.49 Today
DesignXPQA-PPair (1 x red, 1 x blue)1/2" x 20 x 52mm £16.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR22X-SSingleAerator chrome F22x1 12 L/Min£6.99 Today
ST17-SSingle17mm spanner£6.50 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today

BRISTAN DESIGN UTILITY X SPARES
Tap Magician compatible spare parts to repair the Bristan Design Utility X Crosshead Kitchen Mixer High Neck Pillar Taps DUX HNK C.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Known by codes VS02-C20. Coding on original Valve BS5412 XZ 20.

Cartridge has 20 teeth on spline.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side,
If you require both then you can select "Pair"

How to remove my Bristan Design Utility X tap head handle?
Remove red/blue indices on the ends of the handle. Use crosshead screwdriver to undo screw holding handle on.
Pull tap head off and unscrew the shroud anticlockwise.

See tap diagram below



How to identify my Bristan tap? How to repair my leaking Bristan Design Utility X Crosshead tap?
Spares available for Bristan Utility tap.

Any further questions contact our experienced technical team.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.