Tap Magician compatible replacement standard tap valves to fit the Ideal Standard Ceraplan standard basin mixers with traditional washer valves suits B8247AA, B8248AA, B8250AA and B8256AA taps.
Original spare part code A951130NU11. Valves have 18 teeth /splines.

Tapered screw A91831914

Handle Adaptor Star Compatible with E960053NU

Our premium Quality BSP ½ fully compatible brass standard screw down, full turn, compression gland will enable you to easily repair your leaking or dripping Ideal Standard basin sink mixer taps.

For guidance / instructions of how to replace a tap valve and remove handles step by step please click here

FAQ
How Do I remove the Ideal Standard Ceraplan standard tap top / head / handle?
Remove blue or red tap indice. This will reveal a screw. Use screw driver to undo this screw holding the handle on. The tap head will then pull off. Once you have the handle off you can remove the screw holding the handle adaptor in place. You will need to re-use this handle adaptor.

How can I repair my dripping ceraplan tap?
If your tap is dripping then its time to replace the internal glands. IF you do not know which side is leaking it is best to replace both. You will need 17mm spanner to remove the valve.

If you need a new aerator (flow limitor) B9607514AA this is our SR24C
Ceraplan traditional valve. Headwork. 18 teeth. Standard screw down valve. Rubber Washer valve. Compression Gland. Watch our How to video for further general guidance on removing tap handles and replacing tap cartridges.