ABODE EDGE SPARES
Tap Magician compatible spares / parts to repair the Abode Edge kitchen mixer mono tap AT1158, AT1159.
Watch our help video below for guidance / how to change your Quarter turn ceramic valves.
If your Abode Edge tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Hot and cold valves available.
Cartridge has 28 teeth on spline.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".
Compatible with original part codes SP3308 / 3308R / ASCDV0009.
If your tap is leaking from where the spout joins the tap body (the neck) then you need to replace the O Rings inside the spout.
Our kit is compatible with the 3473R.
You can find the Abode Edge tap diagram/instructions below.
Frequently asked questions about your Abode Edge tap.
How Do I remove the handle and replace the valve?
1. Using a 2mm allen key loosen the grub screw at the rear of the handle
2. Pull the handle
horizontally away from the body of the tap
3. Using a spanner (ST03-S) unscrew the valve and remove it from the body.
If you require an allen key to remove the handle then you can purchase our Allen Key Pack (SK01-S).
How to remove the Spout?
Use 2.5mm allen key to undo screw at the back of the spout. Pull spout up and out of tap body.
Using our fitting and removal tool.
Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body.
The old valve may have two flats instead of a hex nut.
Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.
How to identify my abode tap? How to repair my leaking abode tap? Spares available for Abode.
Any further questions contact our experienced technical team.