Watch our video below for guidance / how to remove your handles and change your Quarter turn ceramic cartridge



Tap Magician compatible spares / parts to repair the Franke Maris Mono Mixer Silk Steel and Chrome Kitchen tap.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by SP3308, 3308R, SP3794 3794R, 133.0358.055, 133.0358.053 133.0150.220, 133.0150.219, hot and cold valves available

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair"
Your tap handle may utilise a plastic handle adaptor / tap head carrier. Sometimes this can wear on the inside or break and we can supply this part if you require a new one (Our part SA03-S).

We now offer compatible lever handles. These do not match the originals so must be replaced together as a set (pair) so that they match. Our handles are plain and do not have H or C stamped on them. They come supplied with a new grub screw. Our handles do not use the plastic handle adaptor.

If you require a new handle retaining screw this is our SS04-S (compatible with 133.0440.340)

Replacement tap chrome base ring / plinth available (compatible with 133.0251.358)

FAQ How do I remove the handle on the Franke Maris kitchen mixer tap?
You will need to use a 2.5mm Allen key to undo the grub screw on the underside of the handle. Pull the lever forwards to give more room to access the screw from behind.
How can I remove the cartridge my old valve has two flats instead of a hex nut

Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

You can find the Maris tap / instruction diagram below.