If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by SP3308, 3308R, SP3794 3794R, 133.0358.055, 133.0358.053 133.0150.220, 133.0150.219.
Hot and cold valves available.

Cartridge has 28 teeth on spline.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".
Your tap handle may utilise a plastic handle adaptor / tap head carrier.
Sometimes this can wear or break and we can supply this part if you require a new one (Our part SA03-S).

If your tap is leaking from the neck (where the spout meets and joins the tap body) then the seals inside the spout need replacing.

We now offer a replacement set of tap levers - these are a different design to the original (3757R) so need to be replaced together.
Our handles do not use the plastic handle adaptor. They come complete with grub screws.
*Please note they are plain and not stamped H or C*.

How to remove the Franke Wave lever handle:
Step 1. Use an allen key to remove the grub screw on the underside of the handle.
Step 2. Once removed the handle will pull off away from the tap body.
If you require an allen key to remove the handle then you can purchase our Allen Key Pack (SK01-S).

How to remove your cartridge - Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body. The old valve may have two flats instead of a hex nut. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

Handle screw is our SS04-S (original part code 133.0440.340).

You can find the Wave tap / instruction diagram below.