Aerators and Spray Heads
Free Delivery over £100.00
Order by 3pm for same working day dispatch by Royal Mail 24
Order by 3pm for same working day dispatch by Royal Mail 24

Compatible Spare Parts for the Homebase Funktion

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
FunktionMV-CRClockwise (to open) red39mm Mini Valve£12.99 Tomorrow
FunktionMV-ABAnticlockwise (to open) blue39mm Mini Valve£12.99 Tomorrow
FunktionMV-PPair (1 x red, 1 x blue)39mm Mini Valve£25.98 Tomorrow
FunktionMV-PTPair with fitting tool39mm Mini Valve£35.97 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR24C-SSingleAerator chrome£6.00 Tomorrow
SK22-SSingleSpout O ring repair kit£5.00 Tomorrow
ST03-SSingleBox spanner for Mini Valve£9.99 Tomorrow
SL05-SSingleLubricant£3.50 Tomorrow
SK01-SSingleSet of Allan Keys£1.99 Tomorrow
ST0TTK-SSingleMonobloc Tap Tightening Set£10.50 Tomorrow

Replacement Ceramic tap cartridges and O'ring spare parts compatible with the Homebase Funktion Monobloc Kitchen tap.

If your Homebase Funktion 368588 tap is leaking or dripping from the spout then it is time to replace the internal ceramic disc cartridges.
Original cartridges known by spare part codes 3308R / SP3308 and oring kit 1239R.

You will need the anticlockwise open for the cold side and the clockwise open for the hot side.
The cartridges are quarter turn with 28 teeth on the spline.

If you tap is leaking around the base of the spout then you need to replace the o rings inside of the spout.

Replacement O'ring kit available as SK22-S.

If you need a new spout aerator / antisplasher this is our SR24C

How to remove the handle lever:
Undo the grub screw from the underside of the handle with an allen key and pull away from tap body.

How to remove your cartridge:
Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body.
The old valve may have two flats instead of a hex nut. Our tool has two ends, one end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

How to remove tap spout and replace orings:
Unscrew spout locking collar anticlockwise and pull spout up out of tap body.

Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.