HOMEBASE JUXX TAP SPARES
Tap Magician compatible spares to suit the Homebase Modella Rumba Juxx 503026 Dual Handle Mono Tap.

Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.


If your tap is dripping or leaking out of the spout then it is time to change the quarter turn ceramic disc cartridges.
Original spare part codes known by 3308R / SP3308. Hot and cold valves available.

Cartridge has 28 teeth on spline.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

How To remove the handle:
There will be a grub screw on the underside of the handle. Use an allen key to remove the handle.
You can purchase our Allen Key Pack (SK01-S). The handle will then pull off.

Your tap handle may utilise a plastic handle adaptor / tap head carrier.
If you require a replacement adaptor you will need our SA03-S compatible with original code SP3530.

How to remove your cartridge:
Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body.
The old valve may have two flats instead of a hex nut. Our tool has two ends, one end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

If your tap is leaking from where the spout joins the tap body (the neck) then you need to replace the O'rings inside the spout.
Our SK35-S spout repair kit is compatible with the 3527R.

If you require a new aerator this is our SR24C-S.

You can find the Rumba Juxx tap instruction diagram below.