Tap Magician compatible spares / parts to repair the Howdens Lamona Enza kitchen tap TAP3585.

Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings

If your Enza tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by 3308R / SP3308 hot and cold valve replacements available.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

The Enza tap utilises a plastic handle adaptor (SA03) original code 3537R, 3530R, SP3530.

If your tap is leaking from where the spout joins the tap body (the neck) then you need to replace the O Rings inside the spout. Our kit is compatible with the 3527R.

How to remove the original cartridge _ Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body. The old valve may have two flats instead of a hex nut. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

You can find the Enza tap diagram/instructions below.

How to remove the handle: Loosen grub screw on the underside of handle using a 2.5mm allen key. Then pull handle horizontally away from the body.

How to replace the spout o_rings: Loosen grub screw on the rear of body using an allen key. Then pull the spout vertically away from the body.

How to replace the tap aerator: Unscrew old aerator anticlockwise. Replace with new aerator (SR24C). May be called tap nozzle or antisplasher.

If your enza tap is loose you can purchase our tap tightening kit