Rangemaster Intense Spare Parts IntenseMV 8FC274C2 1

FREE DELIVERY
OVER £100.00

SAME DAY DISPATCH
MONDAY-FRIDAY BEFORE 3PM

NEXT DAY DELIVERY
AVAILABLE

Compatible Spare Parts for the Rangemaster Intense

Please select from the available product options shown below

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
IntenseMV-CR	Clockwise (to open) red	39mm Mini Valve	£9.79		Today
IntenseMV-AB	Anticlockwise (to open) blue	39mm Mini Valve	£9.79		Today
IntenseMV-P	Pair (1 x red, 1 x blue)	39mm Mini Valve	£19.58		Today
IntenseMV-PT	Pair with fitting tool	39mm Mini Valve	£29.57		Today

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
SH0ASC-II	Two singles	Chrome Handle 28 Spline	£30.00		Today
SR63C-S	Single	Aerator chrome	£6.60		Today
SR63CB-S	Single	Aerator brushed chrome	£6.99		Today
SA03-S	Single	Handle Adaptor & Screw	£3.50		Today
SK01-S	Single	Set of Allan Keys	£1.99		Today
ST03-S	Single	Box spanner for Mini Valve	£9.99		Today
ST0TTK-S	Single	Monobloc Tap Tightening Set	£10.50		Today

Tap Magician compatible spare parts to fit the Rangemaster Intense Twin dual Lever Chrome Kitchen Mixer Tap TID1CM Chrome / TID1BF Brushed Brass / TID1GR Graphite / TID1MB Black / TID1BC Brushed Copper.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by ASCDV0009 / 3794R / SP3794/ 3794R / SP3308 / 3308R.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

If your tap is leaking from round the neck (where the spout joins the tap body) then the seals inside the spout need replacing. You need to replace all parts from the O'Ring seal kit.
The original O'ring kit is known by 1239R. You should apply silicone grease to the o rings before replacing the spout.

If you require a new antisplasher /aerator this is our part SR63C/CB (available in Chrome and Brushed Chrome only).
Original codes known by 133.0068.762 SP1263 /1263R CH. Your original part may have Neoperl stamped around the edge.

Your tap handle may utilise a plastic handle adaptor / tap head carrier. Sometimes this can wear or break and we can supply this part if you require a new one (Our part SA03-S). Original tap handle adaptor code SP3530.

We now offer a replacement set of lever handles. Please note our levers are not the same design as the original so must be replaced together as a set. Our handles do not use the plastic handle adaptors.

FAQ
How to remove your cartridge?
Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body. The old valve may have two flats instead of a hex nut. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

How to remove my Rangemaster Intense tap handle?
Use a Allen key to remove grub screw on the underside of the handle. The handle will then pull off.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.