RANGERMASTER SALORNO KITCHEN TAP SPARES

Replacement Cartridges and spares to fit the Rangemaster Salorno Twin Lever Kitchen Mixer Tap TSN1CM / TSN1BF.
Watch our easy guide/ tutorial to take you through step by step replacing the cartridges and spout o rings.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original part code SP3308 3308R.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

Cartridge has a white plastic spline handle adaptor. This is a separate part and can be purchased if yours is worn or no longer grips the cartridge spline. This is our part SA03-S.

If your tap is leaking at the base of the spout you need the spout o rings. Sometimes the spout can get pin holes or damage meaning o'rings don't fix the leak. If this happens you can replace with our compatible swan neck spout. This is a taller design to the original.

If you require a new aerator this is our SR18C-S.

How to remove the Salorno tap lever handle/head?
1. Use allen key to undo grub screw on underside of the tap lever.
2. Pull handle off.

How to remove your Salorno cartridge
Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body. The old valve may have two flats instead of a hex nut. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

How to remove the swivel spout on the Rangemaster Salorno tap?
Unscrew locking collar at the base of the spout. Pull spout up and out of tap body. Replace o rings (original parts 1239R)

Repair my Salorno tap, how to fix my dripping Rangemaster Salorno tap, how to replace my cartridges.
Cartridges known by tap spares, tap washers, tap inserts, tap glands