Compatible Spare Parts for the Carron Phoenix Rosolina L

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Rosolina-LMV-CRClockwise (to open) red39mm Mini Valve£9.99 Today
Rosolina-LMV-ABAnticlockwise (to open) blue39mm Mini Valve£9.99 Today
Rosolina-LMV-PPair (1 x red, 1 x blue)39mm Mini Valve£19.98 Today
Rosolina-LMV-PTPair with fitting tool39mm Mini Valve£31.97 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK18-SSingleSpout O Ring Tap Repair Kit£6.00 Today
SA03-SSingleHandle Adaptor & Screw £3.50 Today
SK01-SSingleSet of Allan Keys£1.99 Today
SS04-SSingleM5 handle grub screw£3.00 Today
ST03-SSingleBox spanner for Mini Valve£9.99 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today


CARRON PHOENIX ROSOLINA L TAP SPARES
Replacement Ceramic tap cartridges compatible with the Carron Phoenix Rosolina L spout kitchen tap.


Watch our video below for guidance / how to remove your handle and change the quarter turn ceramic valves.



If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by ASCDV0009 / 3794R / SP3794/ 3794R / SP3308 / 3308R.
Hot and cold valve replacements available.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair"

If you need a new screw for the handle this is our SS04-S.

If your tap is leaking from round the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
You need to replace all parts from the O'Ring seal kit The original Oring kit is known by 3668R.
You should apply silicone grease to the o rings before replacing the spout.

How to remove my Rosolina tap head / handle?
Remove the handle retaining screw by using a 2.5mm allen key. You can then remove the handle.
You will then need a crosshead screwdriver to remove the brass screw holding the white plastic handle insert onto the valve.
Once you’ve removed this, you can unscrew the valve by using a 14mm box spanner (ST03-S) and fit the replacement parts.

Your tap handle may utilise a plastic handle adaptor / tap head carrier. Sometimes this can wear or break and we can supply this part if you require a new one (Our part SA03-S).
Original tap handle adaptor code SP3530 / 133.0153.218.

How to remove your cartridge?
Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body. The old valve may have two flats instead of a hex nut. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

How to remove the tap spout and replace the O Rings?
To replace the o rings, you will first need to remove the spout retaining screw by using a 2.5mm allen key.
You can then lift the spout out and replace the o rings at the base with our SK18-S o'ring kit.

You can find the Rosolina L Spout tap / instruction diagram below.
Frequently asked questions about your Carron Phoenix Rosolina tap.

How to identify my Carron Phoenix tap? How to repair my leaking Carron Phoenix Rosolina tap? Spares available for Carron Phoenix Rosolina.
Any further questions contact our experienced technical team.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.