Compatible Spare Parts for the Carron Phoenix Savona

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SavonaMV-CRClockwise (to open) red39mm Mini Valve£9.99 Today
SavonaMV-ABAnticlockwise (to open) blue39mm Mini Valve£9.99 Today
SavonaMV-PPair (1 x red, 1 x blue)39mm Mini Valve£19.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK18-SSingleSpout O Ring Tap Repair Kit£6.00 Today
SS81-SSingleM4 stainess grub screw for Handle£3.00 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today
SR63C-SSingleAerator chrome£6.99 Today
SR63CB-SSingleAerator brushed chrome£6.99 Today
SH59C-SSingleChrome Handle Compatible 3529R£16.00 Today
ST03-SSingleBox spanner for Mini Valve£9.99 Today


CARRON PHOENIX SAVONA TAP SPARES
Replacement Ceramic tap cartridges and o'ring spare parts compatible with the Carron Phoenix Savona tap.


Watch our video below for guidance / how to remove your handles and change your Quarter turn ceramic cartridge.


If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by ASCDV0009 / 3794R / SP3794/ 3794R / SP3308 / 3308R.
Hot and cold valve replacements available.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
You can purchase replacement screws for the handle, this is our SS81-S.

We now have new Compatible replacement handles available which replace code 3259R.
Please note our handles are plain and do not have H / C marked on them.
These are supplied as a pair with handle retaining screws.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 1260R / 133.0277.067.

If you require a new antisplasher / aerator this is our part SR63C/CB (available in Chrome or brushed).
Original codes known by 133.0068.762 SP1263 /1263R. Your original part may have Neoperl stamped around the edge.

How to remove my Savona tap head / handle?
Remove the handle retaining screw by using a 2mm allen key. You can then remove the handle.
With this removed unscrew the handle cover / shroud unscrewing anticlockwise.
You can now remove the valve by using a 14mm box spanner (ST03-S) and fit the replacement parts.

How to remove your cartridge?
Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body. The old valve may have two flats instead of a hex nut. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

How to remove the tap spout and replace the O Rings?
To replace the o rings, you will first need to remove the spout retaining screw by using a 2.5mm allen key.
You can then lift the spout out and replace the o rings at the base with our SK18-S o'ring kit.

You can find the Savona tap diagram / instructions below.
Frequently asked questions about your Carron Phoenix Savona tap.

How to identify my Carron Phoenix tap? How to repair my leaking Carron Phoenix Savona tap? Spares available for Carron Phoenix Savona.
Any further questions contact our experienced technical team.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.