Compatible Spare Parts for the Franke Maris

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
MarisMV-CRClockwise (to open) red39mm Mini Valve£10.99 Today
MarisMV-ABAnticlockwise (to open) blue39mm Mini Valve£10.99 Today
MarisMV-PPair (1 x red, 1 x blue)39mm Mini Valve£21.98 Today
MarisMV-PTPair with fitting tool39mm Mini Valve£31.97 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SS04-SSingleM5 handle grub screw£3.00 Today
SA03-SSingleHandle Adaptor & Screw £3.50 Today
ST03-SSingleBox spanner for Mini Valve£9.99 Today
SK01-SSingleSet of Allan Keys£1.99 Today
SF048-SSingleChrome Plinth£9.99 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today


Watch our video below for guidance / how to remove your handles and change your Quarter turn ceramic cartridge



Tap Magician compatible spares / parts to repair the Franke Maris Mono Mixer Silk Steel and Chrome Kitchen tap.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by SP3308, 3308R, SP3794 3794R, 133.0358.055, 133.0358.053 133.0150.220, 133.0150.219, hot and cold valves available

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair"
Your tap handle may utilise a plastic handle adaptor / tap head carrier. Sometimes this can wear on the inside or break and we can supply this part if you require a new one (Our part SA03-S).

If you require a new handle retaining screw this is our SS04-S

Replacement tap chrome base ring / plinth available (compatible with 133.0251.358)

FAQ How do I remove the handle on the Franke Maris kitchen mixer tap?
You will need to use a 2.5mm Allen key to undo the grub screw on the underside of the handle. Pull the lever forwards to give more room to access the screw from behind.
How can I remove the cartridge my old valve has two flats instead of a hex nut

Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

You can find the Maris tap / instruction diagram below.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.