HOMEBASED FUNKTION KITCHEN TAP SPARES
Replacement Ceramic tap cartridges and O'ring spare parts compatible with the Homebase Funktion Monobloc Kitchen tap.

If your Homebase Funktion 368588 tap is leaking or dripping from the spout then it is time to replace the internal ceramic disc cartridges.
Original cartridges known by spare part codes 3308R / SP3308 and oring kit 1239R.

You will need the anticlockwise open for the cold side and the clockwise open for the hot side.
The cartridges are quarter turn with 28 teeth on the spline.

If you tap is leaking around the base of the spout then you need to replace the o rings inside of the spout.

Replacement O'ring kit available as SK22-S.

If you need a new spout aerator / antisplasher this is our SR24C

How to remove the handle lever:
Undo the grub screw from the underside of the handle with an allen key and pull away from tap body.

How to remove your cartridge:
Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body.
The old valve may have two flats instead of a hex nut. Our tool has two ends, one end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

How to remove tap spout and replace orings:
Unscrew spout locking collar anticlockwise and pull spout up out of tap body.

Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.