Compatible Spare Parts for the Lamona Enza

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
EnzaMV-CRClockwise (to open) red39mm Mini Valve£10.99 Today
EnzaMV-ABAnticlockwise (to open) blue39mm Mini Valve£10.99 Today
EnzaMV-PPair (1 x red, 1 x blue)39mm Mini Valve£21.98 Today
EnzaMV-PTPair with fitting tool39mm Mini Valve£33.97 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR24C-SSingleAerator chrome male thread M22£6.00 Today
SK35-SSingleO' Ring Tap Repair Kit£5.99 Today
SA03-SSingleHandle Adaptor & Screw £3.50 Today
SS04-SSingleM5 handle grub screw£3.00 Today
SS06-SSingleM5 x 6mm round head grub screw£3.49 Today
SK01-SSingleSet of Allan Keys£1.99 Today
ST03-SSingleBox spanner for Mini Valve£9.99 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today


Tap Magician compatible spares / parts to repair the Howdens Lamona Enza kitchen tap TAP3585.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by 3308R / SP3308 hot and cold valve replacements available.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

The Enza tap utilises a plastic handle adaptor (SA03) original code 3537R, 3530R, SP3530.

If your tap is leaking from where the spout joins the tap body (the neck) then you need to replace the O Rings inside the spout. Our kit is compatible with the 3527R.

How to remove the original cartridge - Our Cartridge Valve removal tool (ST03) is available to enable easy removal and fitting of the cartridges which are recessed into the tap body. The old valve may have two flats instead of a hex nut. Our tool has two ends. One end to remove the cartridge with two flats and one end to remove/fit new cartridge with hex nut.

You can find the Enza tap diagram/instructions below.

How to remove the handle: Loosen grub screw on the underside of handle using a 2.5mm allen key. Then pull handle horizontally away from the body.

How to replace the spout o-rings: Loosen grub screw on the rear of body using an allen key. Then pull the spout vertically away from the body.

How to replace the tap aerator: Unscrew old aerator anticlockwise. Replace with new aerator (SR24C). May be called tap nozzle or antisplasher.



Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.