Compatible Spare Parts for the Homebase Evoke Basin

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Evoke-BasinR4-ABAnticlockwise (to open) blue1/2" x 24 x 51mm 8mm spline diameter £6.99 Today
Evoke-BasinR4-CRClockwise (to open) red1/2" x 24 x 51mm 8mm spline diameter £6.99 Today
Evoke-BasinR4-PPair (1 x red, 1 x blue)1/2" x 24 x 51mm 8mm spline diameter £13.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
ST14-SSingle14mm spanner£6.50 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today


HOMEBASE EVOKE BASIN TAP SPARES
Replacement BSP ½ ceramic cartridges compatible with the Homebase Evoke Basin pillar taps.


For guidance / instructions of how to replace a tap valve step by step please click here

If your evoke tap is dripping then it is time to replace / change the quarter turn ceramic disc cartridges.
The cartridge has 24 splines. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair". Hot and cold valve replacements available.

Frequently asked questions about your Homebase Evoke tap.

How do I remove my Homebase evoke bath tap handle/head/lever?
Remove hot and cold indice from the top of the tap top. This will unscrew and reveal a screw.
Use crosshead screwdriver to undo screw holding handle on. Pull tap top off.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.
How to identify my Homebase tap? How to repair my leaking Homebase Evoke tap?
Spares available for Homebase Evoke.
Any further questions contact our experienced technical team.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.