Compatible Spare Parts for the Bristan Monza

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
MonzaT4-CRClockwise (to open) red1/2" x 28 x 52mm£7.00 Today
MonzaT4-ABAnticlockwise (to open) blue1/2" x 28 x 52mm£7.00 Today
MonzaT4-PPair (1 x red, 1 x blue)1/2" x 28 x 52mm£14.00 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SH00MZ-SSingleHandle Pair Monz£17.99 Today
SR63C-SSingleAerator chrome£6.99 Today
SR63CB-SSingleAerator brushed chrome£6.99 Today
SI01-SSingleTap indices set£6.99 Today
SK22-SSingleO' Ring Tap Repair Kit£5.00 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today
SWSS-SSingleSerrated Washer£0.99 Today
ST14-SSingle14mm spanner£6.50 Today

Replacement spare parts for the Bristan Monza 28 spline MZ SNK EF C.

Watch our video below for guidance / how to remove your handles and change your Quarter turn ceramic cartridge

Please note the cartridges fitted into the Monza tap have changed over the years causing confusion.
You will need to remove your tap handle to check you are purchasing the correct version.
This is the 28 spline version x 52mm tall. Known by Bristan part code 3602R / 3491R / 2998828300.
If you need the 20 spline (1212R) then please clickhere

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
You will need our anticlockwise for the cold and clockwise for the hot side.

If your tap is leaking from where the spout joins the base of the tap (the neck) then you need to replace the spout o rings.
original code 1239R (our code SK22-S).

If you require a new antisplasher / aerator this is our part SR63C/CB (available in Chrome or brushed).
Original codes known by 133.0068.762 SP1263 /1263R. Your original part may have Neoperl stamped around the edge.

Handle replacements available, sold as a pair (hot and cold). Our SH00MZ handles are compatible with the 28 spline cartridge version.
Blue & red tap indice / indicator / screw cover caps available (sold as a pair). Our Si01-S are chrome plastic.
Replacement serrated washers now available. Sold as a twin pack (SWSS-T).

Frequently asked questions about your Bristan Monza tap.

How To remove the handle / lever?
Remove handle indicator / indice by prising it off. You can then remove the handle retaining screw with a crosshead screwdriver.
You will have a serrated washer fitted here. This will need to be reused. You can purchase a replacement if misplaced (SWSS-T).
Now pull the handle away from the tap body to reveal the valve.

How do I remove the spout to replace the o'rings?
Unscrew locking collar at base of spout and pull spout up and out of tap body.
We recommend to apply grease on the new o rings (SK22-S).

When I have replaced my handle the handle is wobbly/loose?
There is a serrated washer which will is between the handle screw and tap handle.
Re-use this serrated washer underneath the new screw. Replacements available (SWSS-T).

How can I stop my Bristan Monza tap from dripping?
You will need to replace the cartridges.
If you are unsure which side has failed you will need to isolate the supply to the hot and cold.
If you can't determine which side is leaking you should replace both sides.

You can find the Monza tap diagram/instructions below.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.