Compatible Spare Parts for the Brita Kelda

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
KeldaQA-ABAnticlockwise (to open) blue1/2" x 20 x 53mm£9.00 Today
KeldaQA-CRClockwise (to open) red1/2" x 20 x 53mm£9.00 Today
KeldaQA-PPair (1 x red, 1 x blue)1/2" x 20 x 53mm£18.00 Today
KeldaQA-PMVHot, Cold & Filter Valve (set of 3)1/2" x 20 x 53mm£28.59 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
MV03C-ABAnticlockwise (to open) blueMini Filter valve Chromed£11.48 Today
SK16-SSingleSpout O'Rings£4.99 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today
ST17-SSingle17mm spanner£6.50 Today


BRITA KELDA TAP SPARES
Tap Magician compatible replacement spares to Fit Brita Kelda Kitchen Filter 3-Way Tap.


Hot Cold and Filtered Valves available along with the Spout O Rings.

If your tap is dripping out of the spout then you need to change the cartridges.
You will require our Anticlockwise open cartridge for the cold and filter, and clockwise open for the hot side.
If you require replacements for all 3 you will need the KeldaQA-PMV option.
Cartridges have 20 teeth on spline.

If your tap is leaking where the spout meets the tap body then this will be the O Rings inside the Spout which need replacing.
Lubricant needs to be used on the new O Rings.

Brita Kelda Frequently Asked Questions.

How do I remove the Brita Kelda Tap handle?
You will need to remove the chrome screw cover on the end of the handle. Remove the the screw. The handle will then pull off and unscrew shroud.

How do I tell which cartridge is leaking on my Brita Kelda?
The cold and the filter are on the same feed so to tell which is leaking between the cold and the filter you will need to remove the aerator which will be attached to a black pipe inside the spout. If the water is coming from the black pipe then you need to replace the filter cartridge. If the leak is coming from around the edge of the spout it will be either the hot or the cold. To identify which is leaking between the hot and the cold You will need isolation valves under the sink. If you do not have isolation valves then you should purchase both the hot and the cold.

How do I remove the Spout?
First remove the aerator on the end of the spout. Use a allen key to undo the grub screw at the back of the spout. Pull spout up and out of the tap body. Replace O'rings in the spout and use silicone grease on the new o'rings.

I have replaced the tap cartridge and the handle is stiff to turn?
When you remove the old cartridge from the tap it is common for the old silicone gasket to remain lodged inside the tap body. This needs to be removed before fitting the new cartridge.

You can find the Brita Kelda tap diagram / instructions below.



If you need advice on removing the tap lever or how to change your cartridge you can contact us for advice. or you can Watch our How to video for guidance on removing tap handles and replacing tap cartridges.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.