MAGNET PORRITT TAP SPARES
Tap Magician compatible spares / parts to repair the Magnet Porritt Chrome Lever pull out spray tap 17472203.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part code has PAINI ASME A112.18.1UPC ANSI NSF61 KK G90 stamped around the edge.
Hot and cold valve replacements available.

You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

Replacement handle available as SH44. These are plain (no Hot or Cold markings) so can be used on either side of the tap.
Handle is supplied with a retaining grub screw and screw cover.
Replacement spray head diffuser available in chrome (SRSPRAYSLIM-S)

Magnet Porritt FAQ

How to remove the handle?
there will be a small chrome screw cover cap on the underside of the handle.
Use a small flat bladed screw driver to prise this off (put plug in so you don't lose parts down the plughole).
You will then need an allen key to loosen the grub screw. The handle will then pull off.

How do I replace the tap cartridge?
Before removing the cartridge first make sure you turn the water off.
Use 17mm or adjustable spanner to undo cartridge (it will unscrew anticlockwise).
Fit new cartridge (clockwise) and replace the tap handle.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.