Compatible Spare Parts for the Paini Paddle

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
PaddleQA-ABAnticlockwise (to open) blue1/2" x 20 x 56mm£12.99 Today
PaddleQA-CRClockwise (to open) red1/2" x 20 x 56mm£12.99 Today
PaddleQA-PPair (1 x red, 1 x blue)1/2" x 20 x 56mm£25.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR63C-SSingleAerator chrome£6.60 Today
SR63C-SSingleAerator chrome£6.60 Today
SK13-SSingleSpout O' Ring Kit£4.25 Today
SL05-SSingleLubricant£3.50 Today
SK01-SSingleSet of Allan Keys£1.99 Today
ST17-SSingle17mm spanner£6.50 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today

Tap Magician compatible replacement tap cartridge to fit Paini Contemporary Cox Cruciform Paddle Lever Monobloc 6L Tap 78PW4906LUK / 78CR4906LUK.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Cartridge has 20 teeth on spline. Hot and cold valves available.
Compatible with original cartridge codes 53CC581ASA (hot) / 53CC581ADA (cold).

You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.

If you require a new antisplasher /aerator this is our part SR63C/SR63CB (available in Chrome or brushed).

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.


How do I remove my Paini Paini Contemporary Cox Cruciform Paddle handle / head?

Use allen key to undo grub screw on the underside of the tap handle.
The tap handle will pull off. Then you will need to unscrew the shroud / tap cover anticlockwise.

How do I replace the tap cartridge?
First make sure you turn the water off. Use 17mm or adjustable spanner to undo cartridge (it will unscrew anticlockwise).
Fit new cartridge (clockwise) and replace the tap handle.

How do I replace the spout O'rings?
Use allen key to undo the screw at the back of the spout. Pull spout up and out of tap body.
Replace the O'rings on tap spout with SK13-S. Apply silicone grease to O'Rings before refitting.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.