LAMONA VICTORIAN TAP4801 TAP SPARES

Tap Magician compatible spare parts to repair the Howdens Lamona Victorian tap TAP4801 Kitchen mixer tap.

For guidance / instructions of how to replace a tap valve step by step please click here

If your Victorian TAP4801 tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 3547R, SP3547, 4276R, SP4276, 3561R. Hot and cold valves available.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

Your cartridge may come out attached to the adaptor bush (sometimes this remains inside the tap and other times it comes out attached to the cartridge). If you cannot separate this bush then you will need to purchase a new bush Original code 3409R which has 28mm thread diameter. (Our code SB28).

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by 1239R, SP1239.

If you require a new antisplasher /aerator this is our part SR63C/CB (available in Chrome or brushed).
Original codes known by 133.0068.762, SP1263 /1263R. Your original part may have Neoperl stamped around the edge.

How to remove the Victorian TAP4801 handle and replace the cartridge?
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove the handle retaining screw, by using an allen key.
Step 2. Pull the handle away from the tap body.

How to replace the spout O'rings on the Victorian TAP4801 kitchen tap?
Step 1. Whilst holding body unscrew the spout locking collar anticlockwise.
Step 2. Once removed pull the spout vertically away from the body.

Victorian TAP4801 tap diagram / instructions below.