Compatible Spare Parts for the Lamona Rhone

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
RhoneT4-CRClockwise (to open) red1/2" x 28 x 55mm£12.99 Monday
RhoneT4-ABAnticlockwise (to open) blue1/2" x 28 x 55mm£12.99 Monday
RhoneT4-PPair (1 x red, 1 x blue)1/2" x 28 x 55mm£25.98 Monday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK22-SSingleUnknown£5.00 Monday
SR63C-SSingleUnknown£6.99 Monday
SR63CB-SSingleUnknown£6.99 Monday
SI01-SSingleUnknown£6.99 Monday
SB34-SSingleUnknown£7.94 Monday
SL05-SSingleUnknown£2.99 Monday
ST14-SSingleUnknown£6.50 Monday


Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.
The video was taken on the Lamona Hi Tech but the handles and spout kit are the same.



Tap Magician compatible spares / parts to repair the Lamona Rhone Kitchen Mixer Monobloc Tap (models TAP3407/TAP3497).

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original spare part codes known by 3984R / SP3984 / ASSCDV0001, hot and cold valve replacements available.

Cartridge has 20 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair".

If your cartridge comes out stuck inside the brass bush/ring and you cannot separate then you will need to purchase a new one which is our code SB34, but also known by part 3408R.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals Inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by 1239R.

If you require a new antisplasher /aerator this is our part SR63C/CB (available in Chrome or brushed) Original codes known by 133.0068.762 SP1263 /1263R your original part may have Neoperl stamped around the edge.

You can find the Rhone tap diagram/instructions below.

How to remove the tap handle/head: Lever out the screw cover cap (tap indice) using a small precision screwdriver or fingernail. Unscrew the crosshead screw. Pull the handle away from the tap body.

How to remove and replace the spout o-rings: Whilst holding the tap body unscrew the spout locking collar. Pull the spout vertically away from the body. Remove the old o-rings using a small screwdriver or similar.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.