Compatible Spare Parts for the Ikea Loviken MK1

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Loviken-MK1Q2-ABAnticlockwise (to open) blue1/2" x 20 x 50mm NTC£8.99 Tomorrow
Loviken-MK1Q2-CRClockwise (to open) red1/2" x 20 x 50mm NTC£8.99 Tomorrow
Loviken-MK1Q2-PPair (1 x red, 1 x blue)1/2" x 20 x 50mm NTC£17.98 Tomorrow
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
ST17-SSingle17mm spanner£6.50 Tomorrow
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tomorrow
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tomorrow
SR63C-SSingleAerator chrome£6.60 Tomorrow


IKEA LOVIKEN MK 1 REPLACEMENT TAP SPARES **MK1 and MK2 tap cartridges are not interchangeable**
Tap Magician compatible spares to suit the Ikea Loviken MK1 Dual Lever Monobloc kitchen Mixer tap.


There is no way to identify from the tap itself which version you need,if you no longer have your instruction booklet or are unsure please send us a photo of the cartridge. If you need the MK2 cartridge please clickhere

Watch our help video below for guidance / how to change your Quarter turn ceramic valves.


Original spare part codes known by t20x23a/118211
Hot and cold valve replacements available.

Cartridge has 20 teeth on spline. BSP 1/2"

You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking from where the spout joins the tap body (the neck) then you need to replace the O Rings inside the spout.

Frequently asked questions about your Ikea Loviken tap MK1.

How to stop my tap from dripping?

If your tap is dripping you need to replace the quarter turn cartridges

How do I remove the handle?

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.