RANGEMASTER AQUADISC 1 TAD1CM KITCHEN TAP SPARES

Replacement spare parts to repair the Rangemaster Leisure Aquadisc 1 TAD1CM kitchen mixer tap models
5015834018270 / 1 TAD1CM / TAD1
If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original cartridge know by spare part codes 1265R / SP1265 / ASCDV0002.
Cartridge has 24 teeth on spline. Hot and cold valve replacements available.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.

Replacement aerator is available as SRBLK-S.

How to remove the 1TAD1CM tap handle?
Before replacing the cartridge you will need to turn the water off.
Step 1. First unscrew the vertical lever.
Step 2. Once removed this will reveal a grub screw. Use 3mm allen key to undo grub screw.
Step 3. With the grub screw removed the handle will pull off away from the body.

How do I remove the 1TAD spout to change the spout O Ring?
NOTE: This spout is snap fitting and may require the tap to be removed from the sink/worktop before carrying out the procedure.
Whilst holding the tap body firmly in place remove spout by pulling it vertically away from the body.

You can find the 1TAD1CM tap / instruction diagram below.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.