Tap Magician compatible spares / parts to repair the Cooke and Lewis Treur Kitchen Swan Neck tap 49A. Sold By screwfix as 6886T mono mixer tap or 49A M3207Q CP / 3663602930600.

Watch our video below for guidance / how to remove your handles and change your Quarter turn ceramic cartridge


Please be aware there are many other manufacturers which have identical looking taps which take a different size valve so if you have identified just by a photo online this may not be the right part. If you are not certain you have the Cooke and Lewis Treur please send us a photograph of the cartridge removed from the tap for us to identify and confirm which size you need.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Original Cartridge may have BS5412 XZ 20 stamped around the edge. Hot and cold valves available.

We supply the cartridge with the new plastic blue adaptor / handle carrier. This blue handle carrier has 32 teeth

**PLEASE NOTE Due to the way the handles operate please note You will require our Clockwise open RED cartridge for the cold side, and the Anticlockwise (blue) for the hot side, If you require both then you can select "Pair"

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber o'rings they need greasing with a potable silicone grease.

If you require a new antisplasher /aerator this is our part SR63C (Chrome)

Fixing kit available

You can find the Treur tap diagram below.
How To remove the handle and replace the cartridge:
1. There will be a grub screw on the underside of the handle. Use 2.5mm allen key to undo this.
2. The handle will then pull off.
3. Use adjustable spanner or our box spanner (STBOX) to undo cartridge. It will unscrew anti-clockwise.
4. Keep a cloth handy as some water will seep out.
5. Replace with new cartridge screwing in clockwise.
6. Replace handle


How to remove the spout and replace the o rings / seals.
1. Use crosshead screwdriver to undo spout retaining screw.
2. Pull spout up and away from tap body.


Handle screw is our SS04_S