HANSGROHE AXOR STARCK 2 HANDLE FLOOR STANDING BATH MIXER SPARES
Tap Magician compatible spare parts to fit the Hansgrohe Axor Starck 2 handle floor standing bath mixer.
For guidance / instructions of how to replace a tap valve step by step please
click here
If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges. Our cartridge is compatible with Hansgrohe part 94149000.
Cartridge has 20 teeth on spline. Hot and cold replacements available.
How to remove the Axor Starck 2 handle floor standing bath mixer handle/head:
Before replacing the cartridge you will need to turn the water off.
Step 1. You need to pull the handle off. There is no retaining screw
Step 2. Use an adjustable spanner to undo the cartridge counterclockwise
Step 3. Screw in the new cartridge clockwise
Step 4. Tighten the cartridge enough to seal, but avoid over-tightening
See tap diagram below.