Compatible Spare Parts for the Abode Atlas Professional

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
AproffTA-CRClockwise (to open) red1/2" Cartridge x 28 x 54mm£10.99 Today
AproffTA-ABAnticlockwise (to open) blue1/2" Cartridge x 28 x 54mm£10.99 Today
AproffTA-PPair (1 x red, 1 x blue)1/2" Cartridge x 28 x 54mm£21.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SRSPRAYC-SSingleSpout Spray Head Chrome£35.00 Today
SK59C-SSingleChrome Handle Pair£27.00 Today
SK59CB-SSingleSatin/Brushed Handle Pair£36.00 Today
SH02C-SSingleChrome Finish Shroud£11.49 Today
SH02CB-SSingleBrushed Finish Shroud£11.49 Today
SK19-SSingleO Ring Tap Repair Kit£5.60 Today
SB27-SSingle27mm adaptor bush£7.94 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today

Watch our video below for guidance / how to change your Atlas quarter turn ceramic valves and Spout O Rings

Tap Magician fully compatible spares for the Abode Atlas Professional Tap AT1247 and AT1248,kitchen Mixer Lever tap. Our cartridge is compatible with 1427R / ASCDV0003 ASCDV0003H ASCDV0003C
If your tap is leaking/dripping out of the spout then it is time to replace the cartridges.
Please note if you have "atlas Aquifier" tap, then we cannot supply the cold side which does both mains cold and filter cold and requires a diverter cartridge.

When you remove your old valve from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush. (Bush is our code SB27, original code 3868R)

The Atlas professional cartridge has 28 splines. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair"

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by 1425R SP1425 (our code SK19)

We have a compatible spray head available in shiny chrome only (SRSPRAYC-S)

How to remove the handle: Use 2mm Allen key to undo grub screw underneath the lever. Pull lever off. You may have to use some force. You can then unscrew the tap cover/ shroud.

If you need replacement handles we have our Kit SK59C-S available (chrome or brushed satin finish) these need to be replaced as a pair as they are slightly different design to the original. Valve covers/ tap shrouds also available.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.