ABODE LYRA TAP SPARES ACT2089 ACT2088

Tap Magician fully compatible spares for the Abode Lyra kitchen Mixer Lever tap. Our cartridge is compatible with 1427R / ASCDV0003 ASCDV0003H ASCDV0003C
If your tap is leaking/dripping out of the spout then it is time to replace the internal ceramic quarter turn cartridges.
When you remove your old valve from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush. (Bush is our code SB27, original code 3868R)

The Lyra cartridge has 28 splines. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair"

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by 1425R SP1425 (our code SK19)

If you require a new antisplasher /aerator this is our part SR63C/CB (available in Chrome or brushed) Original codes known by 133.0068.762 SP1263 /1263R your original part may have Neoperl stamped around the edge.

How to remove the handle: Use Allen key to undo grub screw underneath the lever. Pull lever off. You may have to use some force. You can then unscrew the tap cover/ shroud.

How to remove the tap spout? Use 2.5mm allen key to undo spout at the back. Pull spout up and out of tap body.


How to identify my abode tap? How to repair and fix my leaking abode tap? Spares available. Lyra tap gland. Lyra Tap Inserts. Any further questions contact our experienced technical team.
Watch our help video below for general guidance on removing handles and replacing your Quarter turn ceramic valves.