Tap Magician replacement spares for the Bristan Revolve Kitchen Mixer Mono Tap RVSNKC. If your tap is dripping from the end of the spout then it is time to change the cartridges.
If your tap is leaking where the spout joins the tap body then you need to change the O'Ring seals inside the spout. To remove the spout you need to unscrew the locking nut at the base of the spout.
If new O rings dont resolve your leak it is common for the spout to get tiny pin holes and in this case you can purchase a whole new complete spout. Our spout comes complete with o rings, locking nut (002994825900SP) and aerator. Compatible with 2994825900
Please be aware your cartridge may come out attached to the adaptor bush If you cannot separate the bush from the cartridge then you will need to purchase a new bush as well. Please note the bush may remain inside the tap you won't know if you will require this until you have removed the cartridge. (Bush is known by code 3409R) Our code for this bush is SB28.
If you need new handles you can buy our handle reviver kit (handles different to originals so both to be replaced together)
You can find the Revolve tap diagram/instructions below.
Original spare part codes for the Valve 3684R or 3561R and o ring kit 1239R