Tap Magician compatible spares / parts to repair the CDA TT41 Monobloc Dual Lever Chrome Kitchen Sink Mixer Tap.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 3561R, hot and cold valve replacements available.
Compatible with TT41CH & TT41NI models.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When replacing the spout seals we recommend to lubricate with a silicone grease (SL05-S).
The original O'ring kit is known by 1239R.

If you need a new complete spout we have a compatible swan neck spout available in chrome (SPOUT01C) and brushed nickel (SPOUT01CB). This comes complete with o rings, locking nut and aerator.

Replacement handles are available but will need to be replaced as a pair as they are slightly different to the original.
Available in chrome SH0EIG and brushed nickel SH0EIGCB.

How to remove tap handle replace cartridge?
Remove the indice / screw cover / dust cap using a small flat bladed screwdriver or fingernail.
Unscrew the crosshead screw and pull the handle away from the tap body.
Holding the tap body unscrew the valve using a 17mm ring spanner (ST17-S,STBOX-S,ST0TTK-S) or adjustable wrench.

How to remove / replace the spout o-rings?
Whilst holding body unscrew the spout locking collar.
Pull the spout vertically away from the body.
Remove the old o-rings using a small screwdriver or similar.

Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.