If your tap is dripping or leaking from the end of the spout then it is time to change the internal ceramic disc cartridges.
Our cartridges are fully compatible with the 4276R / 3561R hot and cold valves.

When you remove your tap cartridge the conversion bush (original code 3868R) may come out stuck to the cartridge.
You can try and separate this. If you can't separate it you will need to purchase a new bush (our compatible bush is code SB27).
If your bush remains in the tap block then you can just purchase the cartridge and you do not need to remove the bush from the tap.

If your tap is leaking by the neck (which is where the spout joins the body) you need to replace the seals inside the spout.
You will need an allen key to remove the spout screw. We do not supply a screw with our O ring seal kit so please make sure you keep your screw.
Our O'Ring repair kit is compatible with original 1260R / 3668R codes.

Replacement flow straightener antis plash aerator available in brushed or polished chrome.

How do I remove the handle on the Clearwater Alzira tap and replace the cartridge?
1. Use 2mm allen key to undo grub screw on the underside of the handle.
2. Once removed pull the lever off.
3. Unscrew shroud cover. This will unscrew anticlockwise.
4. Use 17mm or adjustable spanner to undo cartridge anticlockwise.
5. Replace new cartridge screwing in clockwise.
6. Replace handle.

We have replacement handle levers available in brushed or polished chrome.
Please note our handle does not have H and C marked on them, they are plain.