Compatible Spare Parts for the Franke Filterflow Doric

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
FilterDorTA-CRClockwise (to open) red1/2" Cartridge x 28 x 54mm£11.93 Today
FilterDorTA-ABAnticlockwise (to open) blue1/2" Cartridge x 28 x 54mm£11.93 Today
FilterDorTA-3Triflow pack(1 x red, 2 x blue)1/2" Cartridge x 28 x 54mm£35.79 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SH0EIG-SSingleHandle Chrome 28 Spline£25.00 Today
SR02OL-SSingleAerator chrome F22x1 Filter £11.50 Today
SK17-SSingleSpout O' Ring Repair Kit£5.60 Today
SS06-SSingleM5 x 6mm round head grub screw£3.49 Today
SB27-SSingle27mm adaptor bush£7.94 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today
SS81-SSingleM4 stainess grub screw for Handle£3.00 Today

Tap Magician replacement ceramic tap cartridges to fit the Franke FILTERFLOW Doric kitchen tap 120.0615.357.

This cartridge is NOT compatible with the TRIFLOW Doric - You can find the correct cartridge for the Triflow version by clicking here to view

Watch our video below for guidance / how to remove your handles and change your Quarter turn ceramic valves and Spout O Rings.

When you remove your old valve from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.

The Franke cartridge may be known by the following spare part references; s1022 , SP3561, 3561R, 1427R, 133.0438.152, 133.0438.154, 133.0069.364, 133.0069.365 , 133.0194.088, 133.0194.089
The Brass bush is known by code 3868R

If your Doric tap is leaking from the base of the spout where the spout meets the tap body (the neck) then you will need to replace the O Rings / washers inside the spout. The O'ring kit is known by original part number SP2300, 2300R.

If you need a new aerator(end nozzle/anti-splasher) this is part SR02OL and is compatible with 3620R only currently available in chrome

We now have a compatible lever handle compatible with 3012R SP3012 (in chrome) please note our handle is plain and does not have H or C stamped on it.

Franke Filterflow Doric Frequently asked questions

How to I remove the Franke Doric tap handle?
Use 2mm allen key to undo handle. The grub screw is located on the underside of the handle.
You can pull the lever forwards to access the screw at the back if you need more space.
To remove the Franke Olympus G model you will need to unscrew the upright lever by unscrewing it anticlockwise.
You can then remove the valve cover which then releases the rest of the handle.

How do I know if need the adaptor bush?
Until you remove the cartridge from the tap you will not know if you need this part.
This is because sometimes the bush gets corroded to the tap and remains in the tap body, and other times it comes out corroded to the tap cartridge.

Can I remove the adaptor bush from the old cartridge?
Yes you can but it can be very hard to remove due to corrosion. You can try using very hot water, followed by cold water over it, to help break the corrosion seal. The bush unscrews from the cartridge anticlockwise. You will likely ed to use some grips or put it in a vice to remove it. If you cannot separate it you will need to replace the bush.

How do I remove the spout and replace the o'rings inside the spout?
Use 2.5mm allen key to undo grub screw at the back holding the spout in place. pull spout up and out of the tap body. You can watch our How to video above.

What size spanner do I need to remove the Franke filterflow doric tap handle?
You will need a 17mm or an adjustable spanner

You can find the Filterflow Doric tap diagram/instructions below.
Cartridge known by flow valve, 1/4 turn valve, Tap Insert, Tap Barrel, Tap Washer. tap gland. How do I stop my tap dripping?

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.