Franke Filterflow-Kubus Spare Parts Filterflow-KubusTA B4AF132333 1

FREE DELIVERY
OVER £100.00

SAME DAY DISPATCH
MONDAY-FRIDAY BEFORE 3PM

NEXT DAY DELIVERY
AVAILABLE

Compatible Spare Parts for the Franke Filterflow Kubus

Please select from the available product options shown below

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
FilterKubTA-CR	Clockwise (to open) red	1/2" Cartridge x 28 x 54mm	£10.99		Monday
FilterKubTA-AB	Anticlockwise (to open) blue	1/2" Cartridge x 28 x 54mm	£10.99		Monday
FilterKubTA-3	Triflow pack(1 x red, 2 x blue)	1/2" Cartridge x 28 x 54mm	£32.97		Monday

Product Code	Product Options	Description	Unit Price	Buy	Despatch Time
SB27-S	Single	27mm adaptor bush	£7.94		Monday
SR02OL-S	Single	Aerator chrome F22x1 Filter	£10.75		Monday
SR02OLCB-S	Single	F22 x 1 Filter Aerator Brushed Steel	£11.50		Monday
SH06C-S	Single	Olympus Chrome Handle	£19.99		Monday
SH06CB-S	Single	Olympus Satin Finish Handle	£21.00		Monday
SH02C-S	Single	Chrome Finish Shroud	£9.99		Monday
SH02CB-S	Single	Brushed Finish Shroud	£9.99		Monday
SK19-S	Single	O Ring Tap Repair Kit	£5.00		Monday
SL05-S	Single	Lubricant	£3.60		Monday
SK01-S	Single	Set of Allan Keys	£1.99		Monday

FRANKE FILTERFLOW KUBUS KITCHEN TAP SPARES

Tap Magician replacement spare parts to fit the Franke FILTERFLOW Kubus kitchen mixer tap 120.0180.354.
Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.

This cartridge is NOT compatible with the TRIFLOW Kubus, the TRIFLOW model was discontinued in 2011.
If you have the Triflow Kubus model please click here

The Franke cartridge may be known by the following spare part references; S1022 , SP3561, 3561R, 1427R, 133.0438.152, 133.0438.154, 133.0069.364, 133.0069.365 , 133.0194.088, 133.0194.089

Replacement Franke Filterflow Handles available (Supplied with handle screw).
Please note they do not have H or C engraved on the handle (the handle is plain).
Original handle / lever code 3011R.
Handle retaining screw available separately as SS81-S.

When you remove your old valve from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.
The Brass bush is known by code 3868R

If your Kubus tap is leaking from the base of the spout where the spout meets the tap body (the neck) then you will need to replace the O Rings / washers inside the spout. The O'ring kit is known by original part number 1425R.

If you need a new aerator(end nozzle/anti-splasher) this is part SR02OL / SR02OLCB and is compatible with 3620R / 3620RSS. Available in chrome and silksteel (brushed nickel).

You can find the Filterflow Kubus tap diagram/instructions below.

Franke Filterflow Kubus Frequently asked questions

How to I remove the Franke Filterflow Kubus tap handle?
Use 2mm allen key to undo handle. The grub screw is located on the underside of the handle.
You can pull the lever forwards to access the screw at the back if you need more space.
How do I know if need the adaptor bush?
Until you remove the cartridge from the tap you will not know if you need this part.
This is because sometimes the bush gets corroded to the tap and remains in the tap body, and other times it comes out corroded to the tap cartridge.

Can I remove the adaptor bush from the old cartridge?
Yes you can but it can be very hard to remove due to corrosion. You can try using very hot water, followed by cold water over it, to help break the corrosion seal. The bush unscrews from the cartridge anticlockwise. You will likely ed to use some grips or put it in a vice to remove it. If you cannot separate it you will need to replace the bush.

How do I remove the spout and replace the o'rings inside the spout?
Use 2.5mm allen key to undo grub screw at the back holding the spout in place. pull spout up and out of the tap body. You can watch our How to video above.

What size spanner do I need to remove the Franke Filterflow Kubus tap handle?
You will need a 17mm or an adjustable spanner

Cartridge known by flow valve, 1/4 turn valve, Tap Insert, Tap Barrel, Tap Washer. tap gland. How do I stop my filter tap dripping?

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.