JOHN LEWIS URBANA TAP SPARES

Tap Magician compatible spares / parts to repair the John Lewis Urbana Kitchen Mixer Tap models
JL1020 / JL1021 / 80705040 / 80705019 / 80705005 / 80705020.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 1427R, hot and cold valve replacements available

Cartridge has 28 teeth on spline.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side,
If you require both then you can select "Pair"

When you remove your cartridge from the tap the bush will usually remains inside the tap block however sometimes it comes out together with the valve.
If the valve is stuck inside the bush you can try to separate them.
If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by 1425R SP1425

If you require a new antisplasher / aerator this is our part SR63C-S (Chrome) or SR63CB-S (Brushed).
Original codes known by 133.0068.762 SP1263 /1263R your original part may have Neoperl stamped around the edge.

How to remove the handle:
How do I remove the Ikea Hovskar kitchen tap handle?
Before replacing the cartridge you will need to turn the water off.
Step 1. Remove the handle retaining screw, using appropriate size Allen key (SK01-S).
Step 2. Pull the handle away from the tap body.

Replacement handle adpator available as SA03-S. Supplied with a retaining screw.