Tap Magician compatible spares / parts to repair the Howdens Lamona Victorian tap.
Compatible with models TAP4802 / TAP4803 / TAP4807 / TAP4804 / TAP4822 / TAP4824 / TAP4826.

*** Please note the Victorian 4801 takes a different size.

Watch our how to video for further general guidance on removing tap handles and replacing the spout O Rings.

If your victorian mnonobloc kitchen tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 3561R / ASCDV0003, hot and cold valves available.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 1239R

If you require a new antisplasher / aerator this is our part SR63C/CB (available in Chrome or brushed).
Original codes known by 133.0068.762 SP1263 / 1263R your original part may have Neoperl stamped around the edge.

If you require a new screw for the handle we can offer a compatible replacement reviver kit (plain chrome) these will need to be replaced as the set as they are different to the originals. If you need a new handle screw this is our SS81-S.

You can find the Victorian tap diagram / instructions below.

How To remove the Lamona Victorian handle:
There is a grub screw on the underside of the lever. You will need an Allen Key to remove this and then you can pull the lever off.
Once the lever has been removed the decorative shroud will then unscrew.

How To replace the spout O'rings on the Lamona Victorian kitchen tap?
Whilst holding body unscrew the spout locking collar. Once removed pull the spout vertically away from the body.