Tap Magician fully compatible spares for the San Marco Finley Kitchen Mixer monobloc tap kitchen Mixer Lever tap. Our cartridge is compatible with 3561R
If your tap is leaking/dripping out of the spout then it is time to replace the cartridges.
When you remove your old valve from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush. (Bush is our code SB27, original code 3868R)

The tap cartridge has 28 splines. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side, If you require both then you can select "Pair"

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing. When you replace the new rubber seals they need greasing with a silicone grease. The original O'ring kit is known by 1260R

If you require a new antisplasher /aerator this is our part SR63C/CB (available in Chrome or brushed) Original codes known by 133.0068.762 SP1263 /1263R your original part may have Neoperl stamped around the edge.

We now sell new lever handles. Please note they are plain and do not have H / C on them. They are compatible with part 3259R. They come with screws. If you need a screw on its own you can order SS81-S

You can find the Finley tap / instruction diagram below.