sales@tapmagician.co.uk 01444871313

Trade Registration | Shopping Basket 0

Compatible Spare Parts for the Astracast Lanos

Please select from the available product options shown below
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
LanosTA-CRClockwise (to open) red1/2" Cartridge x 28 x 54mm£10.99 Today
LanosTA-ABAnticlockwise (to open) blue1/2" Cartridge x 28 x 54mm£10.99 Today
LanosTA-PPair (1 x red, 1 x blue)1/2" Cartridge x 28 x 54mm£21.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SH59C-SSingleChrome Handle Compatible 3529R£16.00 Today
SH59CB-SSingleBrushed Nickel Handle Compatible 3529R£18.00 Today
SR63C-SSingleAerator chrome£6.60 Today
SR63CB-SSingleAerator brushed chrome£6.99 Today
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Today
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Today
SK18-SSingleSpout O Ring Repair Kit£5.60 Today
SB27-SSingle27mm adaptor bush£7.94 Today


ASTRACAST LANOS TAP SPARES
Tap Magician replacement cartridges with the Astracast Lanos chrome kitchen sink mixer tap TP1020 Chrome and TP1021 Brushed.

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.

Cartridge has 28 teeth on spline.
You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If you require a new antisplasher / aerator this is our part SR63C/CB (available in Chrome or brushed).

Replacement handles available in brushed Nickel or polished chrome.

Watch our help video below for guidance / how to change your Quarter turn ceramic valves.
Astracast Lanos Frequently asked questions

How to I remove the Astracast Lanos tap handle?
Use 2mm allen key to undo handle. The grub screw is located on the underside of the handle.
You can pull the lever forwards to access the screw at the back if you need more space.

How do I know if need the adaptor bush?
Until you remove the cartridge from the tap you will not know if you need this part.
This is because sometimes the bush gets corroded to the tap and remains in the tap body,
and other times it comes out corroded to the tap cartridge.

Can I remove the adaptor bush from the old cartridge?
Yes you can but it can be very hard to remove due to corrosion.
You can try using very hot water, followed by cold water over it, to help break the corrosion seal.
The bush unscrews from the cartridge anticlockwise. You will likely ed to use some grips or put it in a vice to remove it.
If you cannot separate it you will need to replace the bush.

How do I remove the spout and replace the o'rings inside the spout?
Use 2.5mm allen key to undo grub screw at the back holding the spout in place.
Pull spout up and out of the tap body. You can watch our How to video above.

What size spanner do I need to remove the tap cartridge?
You will need a 17mm or an adjustable spanner.
You can find the Lanos tap / instruction diagram below.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.