Compatible Spare Parts for the CDA TT41

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
TT41TA-CRClockwise (to open) red1/2" x 28 x 54mm£9.99 Today
TT41TA-ABAnticlockwise (to open) blue1/2" x 28 x 54mm£9.99 Today
TT41TA-PPair (1 x red, 1 x blue)1/2" x 28 x 54mm£19.98 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK22-SSingleO' Ring Tap Repair Kit£5.00 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today
ST17-SSingle17mm spanner£6.50 Today


Tap Magician compatible spares / parts to repair the CDA TT41 Monobloc Dual Lever Chrome Kitchen Sink Mixer Tap.

For guidance / instructions of how to replace a tap valve step by step please click here

If your tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 3561R, hot and cold valve replacements available.
Compatible with TT41CH & TT41NI models.

Cartridge has 20 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When replacing the spout seals we recommend to lubricate with a silicone grease (SL05-S).
The original O'ring kit is known by 1239R.

How to remove tap handle replace cartridge?
Remove the indice / screw cover / dust cap using a small flat bladed screwdriver or fingernail.
Unscrew the crosshead screw and pull the handle away from the tap body.
Holding the tap body unscrew the valve using a 17mm ring spanner (ST17-S) or adjustable wrench.

How to remove / replace the spout o-rings?
Whilst holding body unscrew the spout locking collar.
Pull the spout vertically away from the body.
Remove the old o-rings using a small screwdriver or similar.



*** Please note when you remove your old valve from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.