Compatible Spare Parts for the Clearwater Alzira

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
AlziraTA-CRClockwise (to open) red1/2" x 28 x 54mm£9.99 Today
AlziraTA-ABAnticlockwise (to open) blue1/2" x 28 x 54mm£9.99 Today
AlziraTA-PPair (1 x red, 1 x blue)1/2" x 28 x 54mm£19.98 Today
AlziraTA-PWBPAIR WITH SB27 BUSH1/2" x 28 x 54mm£28.00 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SH59C-SSingleChrome Handle Compatible 3529R£16.00 Today
SK18-SSingleSpout O Ring Tap Repair Kit£6.00 Today
SB27-SSingle27mm adaptor bush£7.94 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today
SL50-SSingleRegin Grease 50ml£9.99 Today
ST17-SSingle17mm spanner£6.50 Today
SK01-SSingleSet of Allan Keys£1.99 Today

Tap Magician Compatible Replacement spares to fit the Clearwater Alzira Kitchen Mixer Monobloc tap models TPM1CM and TPM1BF

Watch our video below for guidance / how to change your quarter turn ceramic valves

If your tap is dripping or leaking from the end of the spout then it is time to change the internal ceramic disc cartridges (Our cartridges are fully comaptible with the 4276R / 3561R valves Hot and Cold) .

When you remove your tap cartridge the conversion bush (original code 3868R) may come out stuck to the cartridge. You can try and separate this. If you can't separate it you will need to purchase a new bush (our compatible bush is code SB27)
If your bush remains in the tap block then you can just purchase the cartridge and you do not need to remove the bush from the tap.

If your tap is leaking by the neck (which is where the spout joins the body) you need to replace the seals inside the spout. You will need an allen key to remove the spout screw. We do not supply a screw with our O ring seal kit so please make sure you keep your screw. Our ORing repair kit is compatible with 1260R / 3668R.

How do I remove the handle on the Clearwater Alzira tap?
USe 2mm allen key to undo grub screw on the underside of the handle. Pull lever off. Unscrew shroud (it will unscrew anti-clockwise) If you need a new handle you can purchase from us SH59C-S please note our handle does not have H and C marked on them, they are plain.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.