Compatible Spare Parts for the Clearwater Tutti

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
TuttiTA-CRClockwise (to open) red1/2" x 28 x 54mm£9.99 Monday
TuttiTA-ABAnticlockwise (to open) blue1/2" x 28 x 54mm£9.99 Monday
TuttiTA-PPair (1 x red, 1 x blue)1/2" x 28 x 54mm£19.98 Monday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR63C-SSingleUnknown£6.99 Monday
SR63CB-SSingleUnknown£6.99 Monday
SK17-SSingleUnknown£7.49 Monday
SB27-SSingleUnknown£7.94 Monday
SL05-SSingleUnknown£2.99 Monday
SL50-SSingleUnknown£9.99 Monday
ST17-SSingleUnknown£6.50 Monday
SK01-SSingleUnknown£1.99 Monday


Tap Magician replacement Tap Magician replacement cartridge for the older models of the Clearwater Tutti kitchen mixer tap.
Please note that later versions of this tap have been made by a different manufacturer so we recommend you check and compare your own parts against ours.
This cartridge has 28 Splines and is 54mm tall.

Original cartridge know by code 3561R, adaptor bush code known by SP3868 and O-ring code SP2300.

When you remove your old valve from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.

If you require a new antisplasher /aerator this is our part SR63C/CB (available in Chrome or brushed) Original codes known by 133.0068.762 SP1263 /1263R your original part may have Neoperl stamped around the edge.

How to remove handle. Use Allen key to undo screw beneath handle. Pull lever off. You may need to use some force. Unscrew shroud.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.