Compatible Spare Parts for the Franke Filterflow Olympus

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
FOlympusTA-CRClockwise (to open) red1/2" x 28 x 54mm£10.99 Today
FOlympusTA-ABAnticlockwise (to open) blue1/2" x 28 x 54mm£10.99 Today
FOlympusTA-3Triflow pack(1 x red, 2 x blue)1/2" x 28 x 54mm£32.97 Today
FOlympusTA-AH06CCold Valve and Chrome HANDLE1/2" x 28 x 54mm£26.99 Today
FOlympusTA-CH06CHot Valve and Chrome HANDLE1/2" x 28 x 54mm£26.99 Today
FOlympusTA-AH06CBCold Valve and Brushed Steel HANDLE1/2" x 28 x 54mm£26.99 Today
FOlympusTA-CH06CBHot Valve and Brushed Steel HANDLE1/2" x 28 x 54mm£26.99 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SS81-SSingleM4 stainess grub screw for Handle£3.00 Today
SK19-SSingleO Ring Tap Repair Kit£6.00 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today
SL50-SSingleRegin Grease 50ml£9.99 Today
SB27-SSingle27mm adaptor bush£7.94 Today
SK01-SSingleSet of Allan Keys£1.99 Today
ST17-SSingle17mm spanner£6.50 Today


Tap Magician replacement spare parts to fit the Franke FILTERFLOW Olympus kitchen mixer tap.

*This cartridge is NOT compatible with the TRIFLOW Olympus, the TRIFLOW version was discontunued in 2011. If you have this model you need our Q254LC.


Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.

When you remove your old Cartridge / Insert from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush.

The Franke cartridge may be known by the following spare part references; s1022 , SP3561, 3561R, 1427R, 133.0438.152, 133.0438.154, 133.0069.364, 133.0069.365 , 133.0194.088, 133.0194.089
The Brass bush is known by code 3868R

If your Olympus tap is leaking from the base of the spout where the spout meets the tap body (the neck) then you will need to replace the O Rings / washers inside the spout. The O'ring kit is known by original part number 1425R SP1425. The new seals will need greasing once they have been fitted with suitable silicone grease.

We now have tap handles / levers available (Supplied with handle screw). However these are only available to purchase together with our valve as they will not fit on your original cartridges. Please note they do not have H or C engraved on the handle (the handle is plain) Original handle / lever code 3011R

You can find the Filterflow Olympus tap diagram/instructions below.

How do I remove the Filterflow Olympus tap handle? Use 2mm Allen key to undo grub screw underneath the lever. Pull lever off. Unscrew shroud (anti-clockwise) You can now unscrew the cartridge

How do I remove the spout? Use 2.5mm Allen key to undo grub screw at the back of the spout .Pull spout up and out of tap body.

Tap Gland, Franke tap repair, How can I stop my filter flow Franke tap dripping? Is it easy to change a tap cartridge? Have any more questions please get in touch

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.