Compatible Spare Parts for the Franke Olympus

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
OlympusTA-CRClockwise (to open) red1/2" x 28 x 54mm£9.99 Today
OlympusTA-ABAnticlockwise (to open) blue1/2" x 28 x 54mm£9.99 Today
OlympusTA-PPair (1 x red, 1 x blue)1/2" x 28 x 54mm£19.98 Today
OlympusTA-PWBPAIR WITH SB27 BUSH1/2" x 28 x 54mm£28.00 Today
OlympusTA-AH06CCold Valve and Chrome HANDLE1/2" x 28 x 54mm£25.99 Today
OlympusTA-CH06CHot Valve and Chrome HANDLE1/2" x 28 x 54mm£25.99 Today
OlympusTA-AH06CBCold Valve and Brushed Steel HANDLE1/2" x 28 x 54mm£25.99 Today
OlympusTA-CH06CBHot Valve and Brushed Steel HANDLE1/2" x 28 x 54mm£25.99 Today
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SS81-SSingleM4 stainess grub screw for Handle£3.00 Today
SH02C-SSingleOlympus Chrome Finish Shroud£11.49 Today
SH02CB-SSingleOlympus Satin Finish Shroud£11.49 Today
SK19-SSingleO Ring Tap Repair Kit£6.00 Today
SB27-SSingle27mm adaptor bush£7.94 Today
SR63C-SSingleAerator chrome£6.99 Today
SR63CB-SSingleAerator brushed chrome£6.99 Today
SL05-SSinglePremium Disc/O'Ring Lubricant£2.99 Today

Watch our video below for guidance / how to change your Quarter turn ceramic valves and Spout O Rings.

Franke Olympus Spare Parts to repair your leaking or dripping tap.
Compatible spares for models,
Olympus S, silksteel,
Olympus Side Spray,
Filterflow (The Filterflow takes two anticlockwise and one clockwise)

*This ceramic cartridge is NOT compatible with the Olympus Triflow and Trispray which were discontinued in 2011. For those taps you need our Q254LC model.

When you remove your old Cartridge / Insert from the tap the bush usually remains inside the tap block however sometimes it comes out together with the valve. If the valve is stuck inside the bush you can try to separate them. If you are unable to separate the valve from the bush then you will need to purchase the valve together with the bush. **Please note on the older Olympus G model (identifiable by the red and blue colour indicators on the levers, the conversion bush required is different. It may take our SB26, or it may be an older bush that we do not sell. If in any doubt send us a photo.

The Franke cartridge may be known by the following spare part references; s1022 , S1023 SP3561, 4276R, 3561R, 1427R, 133.0438.152, 133.0438.154, 133.0069.364, 133.0069.365 , 133.0194.088, 133.0194.089.
The Brass bush is known by code 3868R.

If your Olympus tap is leaking from the base of the spout where the spout meets the tap body (the neck) then you will need to replace the O Rings / washers inside the spout. The O'ring kit is known by original part number 1425R SP1425. Please note the Screw supplied will not fit the "G" model (identifiable by the red and blue colour markers on the levers) or Pre 2007 models so be sure to keep your old screw.

We now have tap handles available (Supplied with handle screw). However these are only available to purchase together with our valve as they will not fit on your original cartridges. Please note they do not have H or C engraved on the handle (the handle is plain) Original handle / lever code 3011R.

If you require a new antisplasher this is our part SR63C/CB (available in Chrome or brushed) Original codes known by 133.0068.762 SP1263 /1263R / 02635 your original part may have Neoperl stamped around the edge.

Franke Olympus Frequently asked questions

How to I remove the Franke Olympus tap handle?
Use 2mm allen key to undo handle. The grub screw is located on the underside of the handle. You can pull the lever forwards to access the screw at the back if you need more space.
To remove the Franke Olympus G model you will need to unscrew the upright lever by unscrewing it anticlockwise. You can then remove the valve cover which then releases the rest of the handle.

How do I know if need the adaptor bush?
Until you remove the cartridge from the tap you will not know if you need this part. This is because sometimes the bush gets corroded to the tap and remains in the tap body, and other times it comes out corroded to the tap cartridge.

Can I remove the adaptor bush from the old cartridge?
Yes you can but it can be very hard to remove due to corrosion. You can try using very hot water, followed by cold water over it, to help break the corrosion seal. The bush unscrews from the cartridge anticlockwise. You will likely ed to use some grips or put it in a vice to remove it. If you cannot separate it you will need to replace the bush.

How do I remove the spout and replace the o'rings inside the spout?
Use 2.5mm allen key to undo grub screw at the back holding the spout in place. pull spout up and out of the tap body. You can watch our How to video above.

What size spanner do I need to remove the Franke Olympus tap handle?
You will need a 17mm or an adjustable spanner

Franke Olympus Cartridge can be known as Franke Olympus tap valve, Franke olympus spares, Franke olympus Ceramic Cartridge, Franke Olympus 1/4 turn gland,

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.