Compatible Spare Parts for the Homebase Transition

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
TransitionTA-CRClockwise (to open) red1/2" Cartridge x 28 x 54mm£9.99 Tuesday
TransitionTA-ABAnticlockwise (to open) blue1/2" Cartridge x 28 x 54mm£9.99 Tuesday
TransitionTA-PPair (1 x red, 1 x blue)1/2" Cartridge x 28 x 54mm£19.98 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SK19-SSingleO Ring Tap Repair Kit£5.60 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
ST17-SSingle17mm spanner£6.50 Tuesday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday
Si01-SSingleTap indices set£5.50 Tuesday
SR63C-SSingleAerator chrome£6.60 Tuesday
SR63CB-SSingleAerator brushed chrome£6.99 Tuesday
SK59C-SSingleChrome Handle Pair£27.00 Tuesday

HOMEBASE TRANSITION DUAL HANDLE TAP SPARES
Replacement ceramic cartridge and O'ring spare parts compatible with the Homebase Transition Dual Lever Kitchen Mixer tap.
****Please note if you have the FILTER Version then we can only supply the Hot tap cartridge.****


If your Homebase transition tap is leaking or dripping from the spout then it is time to replace the internal ceramic disc cartridges.
They are easy to replace with just a spanner and a crosshead screwdriver.

Original cartridges known by spare part code 3561R and oring kit 1425R.

You will need the anticlockwise open for the cold side and the clockwise open for the hot side.
The cartridges are quarter turn with 28 teeth on the spline.

If you tap is leaking around the base of the spout then you need to replace the o rings inside of the spout.

How do I remove my spout?
There will be a screw at the back of the spout. Remove this screw and pull the spout upwards and out of the tap body.

How do you remove the handle on the Homebase Transition?
Remove hot and cold indice off the end of the handle, use crosshead screwdriver to undo screw. Pull lever off.

Compatible replacement indices product code Si01-S and aerator SR63C-S (chrome) & SR63CB-S (brushed chrome) available.

If you need a new handle lever you can use our compatible replacement Handle reviver kit.
The handles are plain and do not have any colour indicators on them. They are held on by a grub screw.

Watch our how to video for further general guidance on removing tap handles and replacing tap cartridges.

Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.