Compatible Spare Parts for the Lamona Victorian 4822 4802

Please select from the available product options shown below

Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
Victorian-4822-4802TA-CRClockwise (to open) red1/2" Cartridge x 28 x 54mm£9.99 Tuesday
Victorian-4822-4802TA-ABAnticlockwise (to open) blue1/2" Cartridge x 28 x 54mm£9.99 Tuesday
Victorian-4822-4802TA-PPair (1 x red, 1 x blue)1/2" Cartridge x 28 x 54mm£19.98 Tuesday
Product CodeProduct OptionsDescriptionUnit PriceBuyDespatch Time
SR63C-SSingleAerator chrome£6.60 Tuesday
SR63CB-SSingleAerator brushed chrome£6.99 Tuesday
SS81-SSingleM4 stainess grub screw for Handle£3.00 Tuesday
SK22-SSingleSpout O ring repair kit£5.00 Tuesday
SL05-SSingleLubricant£3.50 Tuesday
STBOX-SSingleCartridge Removal Box Spanner 14 / 17mm£9.50 Tuesday
ST0TTK-SSingleMonobloc Tap Tightening Spanner Set£10.50 Tuesday
SK01-SSingleSet of Allan Keys£1.99 Tuesday


Tap Magician compatible spares / parts to repair the Howdens Lamona Victorian tap.
Compatible with models TAP4802 / TAP4803 / TAP4807 / TAP4804 / TAP4822 / TAP4824 / TAP4826.


*** Please note the Victorian 4801 takes a different size.

Watch our how to video for further general guidance on removing tap handles and replacing the spout O Rings.
If your victorian mnonobloc kitchen tap is dripping or leaking out of the spout then it is time to replace / change the quarter turn ceramic disc cartridges.
Original spare part codes known by 3561R / ASCDV0003, hot and cold valves available.

Cartridge has 28 teeth on spline. You will require our Anticlockwise open cartridge for the cold side, and clockwise open for the hot side.
If you require both then you can select "Pair".

If your tap is leaking from the neck (where the spout joins the tap body) then the seals inside the spout need replacing.
When you replace the new rubber seals they need greasing with a silicone grease.
The original O'ring kit is known by 1239R

If you require a new antisplasher / aerator this is our part SR63C/CB (available in Chrome or brushed).
Original codes known by 133.0068.762 SP1263 / 1263R your original part may have Neoperl stamped around the edge.

If you require a new screw for the handle this is our SS81-S.

You can find the Victorian tap diagram / instructions below.

How To remove the Lamona Victorian handle:
There is a grub screw on the underside of the lever. You will need an Allen Key to remove this and then you can pull the lever off.
Once the lever has been removed the decorative shroud will then unscrew.

How To replace the spout O'rings on the Lamona Victorian kitchen tap?
Whilst holding body unscrew the spout locking collar. Once removed pull the spout vertically away from the body.



Tap Magician are the UK experts in ceramic disc tap cartridges and leaky taps. We offer high quality fully compatible tap valve spares for most UK kitchen, basin, bath and shower mixers. Easily repair and doctor your leaking or dripping hot and cold taps. Traditional or ceramic valve type. We have experienced advisors available for any technical support you need help or advice with. We stock the spare parts for all of our valves for easy and cheap low cost future maintenance (ceramic disc internals and silicone seals and washers and o'rings). We offer a 12 month warranty on all of our products.